Skip to main content

C32 IMO III

    Want to learn more?

    REQUEST A PRICE

    A member of our Sales Team will be in touch to support your enquiry.
    By submitting this form, you consent to receive future marketing communications from us. You have read and agree to our Terms & Conditions and Privacy Policy, and can opt-out at any time.

      Want to learn more?

      Send an Enquiry

      A member of our Sales Team will be in touch to support your enquiry.
      By submitting this form, you consent to receive future marketing communications from us. You have read and agree to our Terms & Conditions and Privacy Policy, and can opt-out at any time.

      Benefits & Features

      Emissions

      Utilizes SCR Technology to enable IMO III emission regulations compliance while lowering operational costs

      Control Strategy

      Utilizes closed loop air assisted DEF dosing control strategy that delivers: Highest efficiency mixing and control to lower operational costs; Extends emissions useful life; Ensures compliance; Flexible to urea quality

      Fuel System

      Enhanced control of fuel injection optimized through crank timing and the A5 ECM technology

      Power Reserve

      Industry leading power reserve

      Certifications

      Wide range of available Marine Society certifications

      Warranty

      Industry-leading warranty coverage for factory packaged components

      Service

      Global dealer network for service in any location

      specifications

      Generator Set Specifications
      Minimum Rating 219 ekW
      Maximum Rating 940 ekW
      Frequency 60hz
      Engine Specifications
      Rated Engine Speed 1500 rpm
      Configuration Vee-12, 4-stroke-Cycle-Diesel
      Aspiration Turbocharged-aftercooled aspiration
      Bore 145.0 mm
      Stroke 162.0 mm
      Displacement 32.1 l
      Governor Electronic (A5 ECM)
      Emissions IMO III emissions certified (SCR required)
      Refill Capacity Lube Oil System w/ oil filter change: 146 L (38.5 gal)
      Oil Change Interval 750 hrs
      Cooling Heat exchanger, keel or radiator cooled
      Generator SR5 - Form Wound
      Generator Set Dimensions
      Length 167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
      Width 59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
      Height 70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
      Package Dry Weight 15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)
      AIR INLET SYSTEM
      • Separate circuit aftercooled (SCAC)
      • Closed crankcase fumes disposal
      CONTROL SYSTEM
      • 24V control system
      COOLING SYSTEM
      • Heat exchanger or Keel Cooling
      • Watercooled exhaust manifold and turbocharger
      • Hard seawater lines – no flexible hoses
      • Flanges for cooling connections, ANSI or DIN
      FUEL SYSTEM
      • Primary fuel filter with water separator installed on base frame
      • Duplex fuel filters with hybrid fuel lines
      GENERATORS AND GENERATOR ATTACHMENTS
      • IP23, air cooled, form wound SR5 generator offered in 380, 400, 415 and 690 V
      LUBE SYSTEM
      • Oil fill, simplex filter and dipstick
      MOUNTING SYSTEM
      • Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
      GENERAL
      • Right or left hand service sides
      • Customer wiring and service tool connector
      ALARM AND PROTECTION
      • MGCPIIIB control panel with Cat® Alarm and Protection System
      • IP44 generator protection
      EXHAUST SYSTEM
      • Muffler
      • Water-in-fuel and exhaust temperature sensors
      • SOLAS approved spray shielding
      CHARGING SYSTEM
      • Charging alternator
      FUEL SYSTEM
      • Manual or electric fuel priming pump
      • Fuel cooler
      LUBE SYSTEM
      • Duplex oil filters
      STARTING SYSTEM
      • Starting motors – air, electric or redundant

      Product specifications, standard and optional equipment may vary depending on stock availability. For more information or to verify specific product details, please get in touch with one of our sales representatives.

      Request Price Enquire Now