C280-16 FMT

Overview

The C280-16 generator set incorporates years of proven success of the 3600 engine with the latest technology in electronics. The result is a fully integrated solution that is ideal for offshore operations. Ideal applications for the C280-16 offshore generator set are main power on-board drilling and production vessels and platforms. These include jackup rigs, semi-submersible rigs, drillships, and production platforms. The new front-mounted turbocharger configuration and complete package offering makes integration of the Cat C280-16 generator set into the vessel a simplified operation by reducing the scope of work and supply at the shipyard. The redundant ADEM A4 engine control system works together with the Cat Alarm and Protection to bring comprehensive generator set control, safety, and simple operator interface. Cat generator sets are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. Cat C280-16 offshore generator set with front-mounted turbochargers. Ratings: 5500 ekW (7684 kVA) @ 60 Hz (900 rpm). IMO Tier II emissions compliant.

Image shown may not reflect actual package.
Enquire
Engine Specifications
Minimum Rating5600ekW
Maximum Rating5730ekW
EmissionsIMO Tier 2 / EPA Marine Tier 2
Displacement296l
AspirationTurbocharged-Aftercooled
Engine ControlDual ADEM™ A4
Bore280mm
Fuel SystemEUI
Oil Change Interval1000h
Stroke300mm
Weight66000kg
Generator Set ControlCat® Alarm and Protection System
Dimensions
Length10283mm
Width2800mm
Height4092mm
Capacity for Liquids
Cooling System - Engine1245l
Lube Oil System - Refill1677l
Product Consist
The engine is a turbocharged, aftercooled, four-strokecycle- diesel, electronic unit injection engine with a 280 mm (11 in) bore by 300 mm (11.8 in) stroke. SAE standard rotation is counterclockwise as viewed from the rear of engine flywheel.
Emissions Certifications
GL and CCS approved IMO certificate — includes statement of compliance or Engine International Air Pollution Prevention (EIAPP) certificate, supplied by the Recognized Organization (RO) where available, and technical file to be kept on board per IMO regulations.
Marine Certification Society type-approval
ABS, BV, CCS, DnV, GL, LRS
Spray shielding to meet SOLAS regulations for flammable fluids
European Certifications
Declaration of Incorporation for EU Machinery Safety
Directive and EU Low Voltage Safety Directive
Air Inlet System
Fresh water aftercooler, corrosion resistant coated (air side)
Air inlet shutoff
Turbochargers (2), front-mounted, oil lubricated
90° adapter and straight adapters for air inlet to turbocharger
Air cleaners
Air cleaners with Cat dry paper filter elements (approximately 99.9% efficient at filtering SAE fine dust)
Control System
Dual Cat ADEM A4 electronic engine control module with electronic unit injector fuel system, rigid wiring harness (10 amp 24V power required to drive electronic engine control modules), direct rack control
Cooling System
Gear-driven jacket water (JW) pump
Gear-driven separate-circuit aftercooler/oil cooler (AC/OC) pump
Front-mounted water connections: JW and AC/OC, 6" ANSI
Jacket Water Thermostat Options:
AC/OC Thermostat Options:
Expansion Tank Options:
Exhaust System
Dry, gas tight exhaust manifold
Dual turbocharger, front-mounted
Dual wastegate; hard shielding - SOLAS compliant
Exhaust manifold shields
Fuel System
Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38°C); fuel pump, gear-driven; fuel transfer pump (mounted on left-hand side); duplex fuel filters, rear-engine-mounted; electronically controlled unit injectors
; crankcase breathers, top-mounted; turbochargers (2), front-mounted, oil lubricated
Lube System
Centrifugal oil filters and lines with single shutoff - RH mounted on cylinder block inspection covers, serviceable with the engine running
Oil pump, gear-driven
Oil filler and dipstick - located in base integrated tank
Oil pressure regulating valve
Duplex oil filter - accessory module mounted
Off engine mounted oil cooler - DTO quote required for package connections
Base integrated tank - DTO required
Electric continuous prelube pump
Redundant prelube with continuous electric prelube
Intermittent air prelube backup
Protection System
Flywheel and damper guards
Crankcase explosion relief valves
Instrumentation
Cat Alarm and Protection System Features:
Starting System
TDI dual air starting motors, LH rear
Shutoff valve
Two integrated relay valves with built-in screen #40 mesh and solenoid
Air pressure sensor, monitored by Cat Alarm and Protection System - requires customer wiring
Maximum operating (dynamic) pressure: 10 bar (150 psi)
Maximum static pressure: 14 bar (200 psi)
3-inch ANSI flange customer connection; requires customer-provided 3-inch supply air line from receiver or regulator to air starter and flex connection; if regulator is used, Cv of 40 or greater is required
Pressure reducing valve
Mounting System
Design-To-Order (DTO) base
General
Generator panel
Torsional coupling
Engine barring device options:
Custom Packaging
For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.
Product Support Offered Through the Global Cat Dealer Network
- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your Cat petroleum product - Worldwide parts availability, service, and warranty - Preventive maintenance agreements available for repairbefore- failure opti
Over 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.
Over 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.
Over 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.
Web Site
For all your petroleum power requirements, visit www.catoilandgasinfo.com.
Web Site
For all your petroleum power requirements, visit www.catoilandgasinfo.com.
Specifications
Engine Specifications
Minimum Rating5600ekW
Maximum Rating5730ekW
EmissionsIMO Tier 2 / EPA Marine Tier 2
Displacement296l
AspirationTurbocharged-Aftercooled
Engine ControlDual ADEM™ A4
Bore280mm
Fuel SystemEUI
Oil Change Interval1000h
Stroke300mm
Weight66000kg
Generator Set ControlCat® Alarm and Protection System
Dimensions
Length10283mm
Width2800mm
Height4092mm
Capacity for Liquids
Cooling System - Engine1245l
Lube Oil System - Refill1677l
Equipment
Product Consist
The engine is a turbocharged, aftercooled, four-strokecycle- diesel, electronic unit injection engine with a 280 mm (11 in) bore by 300 mm (11.8 in) stroke. SAE standard rotation is counterclockwise as viewed from the rear of engine flywheel.
Emissions Certifications
GL and CCS approved IMO certificate — includes statement of compliance or Engine International Air Pollution Prevention (EIAPP) certificate, supplied by the Recognized Organization (RO) where available, and technical file to be kept on board per IMO regulations.
Marine Certification Society type-approval
ABS, BV, CCS, DnV, GL, LRS
Spray shielding to meet SOLAS regulations for flammable fluids
European Certifications
Declaration of Incorporation for EU Machinery Safety
Directive and EU Low Voltage Safety Directive
Air Inlet System
Fresh water aftercooler, corrosion resistant coated (air side)
Air inlet shutoff
Turbochargers (2), front-mounted, oil lubricated
90° adapter and straight adapters for air inlet to turbocharger
Air cleaners
Air cleaners with Cat dry paper filter elements (approximately 99.9% efficient at filtering SAE fine dust)
Control System
Dual Cat ADEM A4 electronic engine control module with electronic unit injector fuel system, rigid wiring harness (10 amp 24V power required to drive electronic engine control modules), direct rack control
Cooling System
Gear-driven jacket water (JW) pump
Gear-driven separate-circuit aftercooler/oil cooler (AC/OC) pump
Front-mounted water connections: JW and AC/OC, 6" ANSI
Jacket Water Thermostat Options:
AC/OC Thermostat Options:
Expansion Tank Options:
Exhaust System
Dry, gas tight exhaust manifold
Dual turbocharger, front-mounted
Dual wastegate; hard shielding - SOLAS compliant
Exhaust manifold shields
Fuel System
Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38°C); fuel pump, gear-driven; fuel transfer pump (mounted on left-hand side); duplex fuel filters, rear-engine-mounted; electronically controlled unit injectors
; crankcase breathers, top-mounted; turbochargers (2), front-mounted, oil lubricated
Lube System
Centrifugal oil filters and lines with single shutoff - RH mounted on cylinder block inspection covers, serviceable with the engine running
Oil pump, gear-driven
Oil filler and dipstick - located in base integrated tank
Oil pressure regulating valve
Duplex oil filter - accessory module mounted
Off engine mounted oil cooler - DTO quote required for package connections
Base integrated tank - DTO required
Electric continuous prelube pump
Redundant prelube with continuous electric prelube
Intermittent air prelube backup
Protection System
Flywheel and damper guards
Crankcase explosion relief valves
Instrumentation
Cat Alarm and Protection System Features:
Starting System
TDI dual air starting motors, LH rear
Shutoff valve
Two integrated relay valves with built-in screen #40 mesh and solenoid
Air pressure sensor, monitored by Cat Alarm and Protection System - requires customer wiring
Maximum operating (dynamic) pressure: 10 bar (150 psi)
Maximum static pressure: 14 bar (200 psi)
3-inch ANSI flange customer connection; requires customer-provided 3-inch supply air line from receiver or regulator to air starter and flex connection; if regulator is used, Cv of 40 or greater is required
Pressure reducing valve
Mounting System
Design-To-Order (DTO) base
General
Generator panel
Torsional coupling
Engine barring device options:
Benefits & Features
Custom Packaging
For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.
Product Support Offered Through the Global Cat Dealer Network
- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your Cat petroleum product - Worldwide parts availability, service, and warranty - Preventive maintenance agreements available for repairbefore- failure opti
Over 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.
Over 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.
Over 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.
Web Site
For all your petroleum power requirements, visit www.catoilandgasinfo.com.
Web Site
For all your petroleum power requirements, visit www.catoilandgasinfo.com.